Products
American Biltrite
AB-138 Series (Natural Rubber)
Beige FDA Sheet
General Properties
- Reliable tensile strength for everyday industrial use
- Tear and abrasion resistant
- Easier buffing
- Good adhesion with proper surface prep
- FDA Grade, meets the requirement for FDA 21 CFR 177.2600
Polymer
Natural Rubber (NR)
| Series | ASTM Specification (SI units) |
Temperature Range | Durometer | Tensile Strength (psi) |
Elongation (%) |
||
|---|---|---|---|---|---|---|---|
| AB-138 | D2000 : 2AA420A13F17 | -20° to 180°F (-29° to 82°C) | 40 | 2000 min. | 2500 typical | 400 min. | 700 typical |
ASTM D2000 Specification and Tests
| ASTM | Description | Value | |
|---|---|---|---|
| D2137 | Cold Temperature | -40°C/°F min. | |
| D395 (Method B) |
Compression Set 22 hrs @ 70°C (158°F) |
50% max. | |
| D573 | Heat Aging 70 hrs @ 70°C (158°F) |
Hardness: +/-15 Tensile (%): +/-30 max. Elongation (%): -50 max. |
Additional specifications
| Grade | Industrial |
| Finish | Smooth |
| Powder | Yes |
| Color | Beige |
| Item Number | Gauge x Width (in) | Avg. Length (Linear Ft. /Roll) |
Surface (sft) |
Approx. Lbs./Roll |
|---|---|---|---|---|
| 128-04-362 | 1/16 x 36 | 100 | 300 | 106 |
| 128-04-482 | 1/16 x 48 | 100 | 400 | 141 |
| 128-06-362* | 3/32 x 36 | 75 | 225 | 121 |
| 128-08-362 | 1/8 x 36 | 50 | 150 | 117 |
| 128-08-482 | 1/8 x 48 | 50 | 200 | 156 |
| 128-12-362 | 3/16 x 36 | 40 | 120 | 134 |
| 128-12-482 | 3/16 x 48 | 40 | 160 | 178 |
| 128-16-362 | 1/4 x 36 | 40 | 120 | 178 |
| 128-16-482 | 1/4 x 48 | 40 | 160 | 237 |
| 128-24-362* | 3/8 x 36 | 30 | 90 | 198 |
| 128-24-482 | 3/8 x 48 | 30 | 120 | 264 |
| 128-32-362 | 1/2 x 36 | 50 | 150 | 441 |
| 128-32-482 | 1/2 x 48 | 50 | 200 | 588 |
| 128-40-362* | 5/8 x 36 | 30 | 90 | 331 |
| 128-40-482* | 5/8 x 48 | 30 | 120 | 441 |
| 128-48-362 | 3/4 x 36 | 30 | 90 | 392 |
| 128-48-482 | 3/4 x 48 | 30 | 120 | 522 |
| 128-64-362 | 1 x 36 | 30 | 90 | 528 |
| 128-64-482 | 1 x 48 | 25 | 100 | 588 |
| 128-64-482 | 1 x 48 | 25 | 100 | 588 |
*Non-stocked size. Made to order with required number of rolls. Longer lead time applies. Contact Kuriyama Customer Service for details.
Maximum pieces per roll: 2 • Minimum piece length: 10' • Width tolerance: -0 / +1"
Meets the requirements for FDA 21 CFR 177.2600: “Rubber articles intended for repeated use may be safely used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section.”
Material is within commercial sheet rubber gauge tolerances.
The documentation for sheet rubber gauge tolerances is published on our website.
Typical values do not constitute a specification. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
Total roll length may vary by ±10% for domestically manufactured (AB-138) Series.