Products
American Biltrite
AB-576 Series (Ethylene Propylene Diene)
Black NSF Sheet
General Properties
- Excellent resistance to heat, ozone and sunlight
- Superior resistance to cold and hot water
- Meets AWWA Standard
- Certified to NSF/ANSI/CAN 61 & 372
Polymer
Ethylene Propylene Diene (EPDM)
| Series | ASTM Specification (SI units) |
Temperature Range | Specific Gravity (gr/cc) |
Durometer | Tensile Strength (psi) |
Elongation (%) |
|---|---|---|---|---|---|---|
| AB-576 | D2000 : 1BA715Z1Z2 | -40° to 250°F (-40° to 121°C) | 1.17 | 75 +/- 5 | 1500 min. | 250 min. |
ASTM D2000 Specification and Tests
| ASTM | Description | Value | |
|---|---|---|---|
| D2137 | Cold Temperature | -40°C/°F min. | |
| D1149 | Resistance to Ozone 72 hrs 100 pphm @ 40°C (104°F) |
No cracking | |
| D1171 | Resistance to Ozone Quality retention (%) |
100cks | |
| D395 (Method B) |
Compression Set 22 hrs @ 70°C (158°F) |
20% max. | |
| D573 | Heat Aging 70 hrs @ 100°C (212°F) |
Hardness: +/-15 Tensile (%): +/-30 max. Elongation (%): -50 max. |
|
| Pressure, Maximum, psig (bar)m *P x T (1/16 inch)ure x Temperature | 250 (17) (°F x psig) | ||
| D149 | Dielectric Properties, range, volts/mil conditioning | < 2 (1/8”) | |
Additional specifications
| Grade | Specification |
| Finish | Smooth |
| Duro | 75 +/- 5 |
| Tensile | 1500 min. |
| Color | Black |
| Item Number | Gauge x Width (in) | Avg. Length (Linear Ft./Roll) |
Surface (sft) |
Approx. Lbs./Roll |
|---|---|---|---|---|
| 386-04-482 | 1/16 x 48 | 50 | 200 | 71 |
| 386-08-482 | 1/8 x 48 | 25 | 100 | 71 |
| 386-08-604 | 1/8 x 60 | 25 | 125 | 95 |
| 386-12-482 | 3/16 x 48 | 20 | 80 | 84 |
| 386-16-482 | 1/4 x 48 | 20 | 80 | 114 |
Maximum pieces per roll: 2 • Minimum piece length: 10' • Width tolerance: -0 / +1"
NSF/ANSI/CAN 61 & 372, section 9 at exposure rate of 0.2 in2/liter. NSF/ANSI/61 & 372, section 6 at commercial hot temperature (180°F) with exposure rate of 2 in2/liter.
FDA Approved ingredients per 21 CFR 177.2600. Material is within commercial sheet rubber gauge tolerances. The documentation for sheet rubber gauge tolerances is published on our website. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.